Maintenance and Manufacturing Staff Instructions (MSI) No. 24: Appendix B

Appendix B

Schedule G-5: Civil Aviation Safety Inspectors Maintenance & Manufacturing

Name of Inspector: Name of Supervisor:
No. Regulation Description Applicable
Y / N
Date of
1. 103.02(1) Notify owner/operator to make aircraft available for inspection

2. 103.02(2) Demand person to produce document/record for inspection

3. 103.04(b) Obtain paper copies of (computer) records

4. 103.06(2) To include in a notice issued pursuant to 7(1) & (2) of the Act: (a) effective date; (b) conditions; (c) statement about stay [see #70 below]

5. 103.06(3) To include in a notice issued pursuant to 7.1 (1) & (2) of the Act: (a) effective date; (b) conditions; (c) statement about stay [see #71 below]

6. 103.07 Suspend, cancel, refuse to renew document when surrendered, illegible, aircraft destroyed / withdrawn, service discontinued

7. 103.09 Mark, care for and return to owner anything seized pursuant to 8.7(1)(c)

8. 103.10 Care for and return aircraft detained pursuant to 8.7(1)(d)

9. 201.01(3) Authorize alternate location for data plate on an aircraft

10. 201.01(6) Authorize attachment of new data plate onto an aircraft

11. 201.03(3) Authorize to perform action requested pursuant to 201.03(2) &(1) aircraft data plates: (a) remove or replace; (b) attach from another aircraft; (c) alter information

12. 201.04(2) Authorize replacement of lost, stolen or damaged aircraft data plate

13. 201.12(4) Authorize action to aeronautical product data plate (remove, replace, alter information)

14. 202.46(1) Request aircraft owner to advise of aircraft location and condition

15. 400.02(4)(b) Approve hand held computer for exams

16. 400.04(5) Authorize exam rewrite and specify conditions

17. 403.03 Issue and endorse aircraft maintenance engineer (AME) licence

18. 403.08(2) Issue approved training organization (ATO) certificate

19.  403.08(3) Approve Policy Manual/Training Control Manual and any amendments, if the manual and amendments meet the requirements of Stand. 566

20. 406.11 Determine in respect of maintenance requirements the ability to maintain operational Control System/licensing standards.

21. 406.36 Approve the Person Responsible for the Maintenance (PRM) Control System in accordance       with the Commercial Air Service Standards.

22. 406.38(1)(b)  Authorize deviations to Flight Training Unit (FTU)

23. 406.38(1)(d)  Instruct FTU to amend MCM

24. 406.38(2) Authorize FTU to incorporate procedures into MCM

25. 406.38(3) Approve a maintenance control manual and any amendments, where the personal licensing standards are met.

26. 406.39(1)(c) Approve performance of maintenance for FTU

27. 406.39(2)(b) Approve maintenance arrangements for FTU

28. 406.39(3) Issue maintenance specification authorizing FTU maintenance arrangements outside of Canada

29. 501.03 Agree to Annual Airworthiness Information Report (AAIR) date

30. 507.02 Issue a C of A

31. 507.03 Issue Special C of A

32. 507.04 Issue flight permit for experiment, ferry, import/export, demo-training, test or other

507.05 Validate foreign flight authority for flight in Canada

34. 507.05 Determine that foreign aircraft with validation is safe for flight

35. 507.06(5) Inspect aircraft subject to C of A application

36. 507.08(1) Issue additional flight authority for aircraft damaged, flown to maintenance site, with multiple configurations

37. 507.09 Prescribe or amend operating conditions on flight authority

 38. 507.12 Amend flight authority issued pursuant to CAR 507

39. 507.13  Replace a lost/destroyed flight authority of a Canadian aircraft as specified in Standard 507

40. 509.03(1) Issue Export Airworthiness Certificate for an aircraft that conforms

 41. 509.03(2) Issue Export Airworthiness Certificate that specifies non-conformity for an aircraft that does not conform

42. 513.10 Make inspection or test to determine compliance with the standards 513.07

43. 523.1529 To find acceptable instruction for Continued Airworthiness

44. 525.1529 To find acceptable instructions for Continued Airworthiness

45. 527.1529 To find acceptable instructions for Continued Airworthiness

46. 529.1529 To find acceptable instructions for Continued Airworthiness

47. 531.82 To find acceptable instructions for Continued Airworthiness

48. 533.4 To find acceptable instructions for Continued Airworthiness

 49. 535.4 To find acceptable instructions for Continued Airworthiness

 50. 571.08(2) Authorize the part to remain in service

 51. 573.02(1) Issue approval certificate to an AMO

52. 573.03 Approve the person responsible for maintenance (PRM)

 53. 573.10(2) Authorize AMO to incorporate procedures by reference into MPM

  54. 573.10(4) Authorize non-conformity with MPM requirements

 55. 573.10(6) Instruct AMO to amend MPM

 56. 573.10(9) To approve a Maintenance Policy Manual (MPM)

 57. 573.11(1)(c) Otherwise approve non-conforming maintenance

 58. 573.11(3) Otherwise approve non-conforming arrangements for work by external agents

 59. 604.05(1) Determine private operator compliance with requirements

 60. 604.48(2) Authorize a deviation

 61. 604.80(4)(c) Approve maintenance requirements of private operator operations manual  (landing minima, training, maintenance control)

 62. 605.07(3) Approve all MEL maintenance functions and procedures of an air operator

 63. 605.86(2) Approve aircraft maintenance schedule

 64. 605.86(3) Authorize deviation to maintenance schedule

 65. 701.10 Issue Flight Authorization

 66. 702.07(1) Determine ability of Aerial Work applicant

 67. 702.07(2)(b) (iii) To approve the maintenance manager in accordance with Commercial Air Service Standards

 68. 702.81(4) Approve maintenance sections of Aerial Work operations manual

 69. 703.07(1) Determine ability of Air Taxi applicant

 70. 703.07(2)(b)(iii) Approve Air Taxi maintenance manager

 71. 703.104(4) Approve maintenance sections of Air Taxi operations manual

 72. 704.07(1) Determine ability of Commuter Operations applicant

73. 704.07(2)(b)(iii) Approve Commuter Operations maintenance manager

74. 704.120(4) To approve, where Commercial Air Service Stand. Are met, those parts of a company operations manual and any amendments to those parts, that relate to the information required by Section 704.121

 75. 705.07(1) Determine ability of Airline Operations applicant

 76. 705.07(2)(b) (iii) Approve Airline Operation maintenance manager

 77. 705.134(4) To approve, where the Commercial Air Service Standards are met, those parts of a company operations manual and amendments to those parts, that relate to the information required by Section 705.135

 78. 706.03 To approve the Person Responsible for the Maintenance (PRM) Control System in accordance with the Commercial Air Services Standards

 79. 706.08(2) Authorize incorporation of referenced procedures into Air Operator MCM

 80. 706.08(3) Authorize Air Operator non-compliance with MCM

 81. 706.08(5) Instruct Air Operator to amend MCM

 82. 706.08(8) To approve an Air Operator’s Maintenance Control Manual (MCM)/amendments to that manual, if requirements of the Commercial Air Service Standards are met

 83. 706.09(1)(c) Approve otherwise unapproved Air Operator Maintenance

 84. 706.09(2)(b) Approve Air Operator maintenance arrangements

 85. 706.09(3) Authorize maintenance (outside Canada) by an organization who does not hold an AMO

 86. Act 6.71(1) To refuse to issue

 87. Act 7(1) Suspend documents (not AOC) for immediate threat

 88. Act 7(1) & (2) Notify document holder of immediate threat decision action

 89. Act 7.1(1(b) b), (c) and (2) Suspend airworthiness related documents (not AOC) for incompetence, ceases to have the qualifications or meet or comply with conditions or in public interest and to notify the holder

 90. Act 8.7(1) Enter any aircraft or facility related to aeronautics for the purpose of inspection, seize anything found and detain any unsafe aircraft

 91. Act. 8.7 (1.1) Carrying out an inspection or audit in any place referred to in paragraph (1) a

 92. Act 8.7(6) To use force in executing a warrant under subsection 8.7(5) of the Aeronautics Act