Pursuant to subsection 5.9(2) of the Aeronautics Act and after having taken into account that the exemption is both in the public interest and is not likely to adversely affect aviation safety, I hereby exempt NAV CANADA, 77 Metcalfe Street, Ottawa, Ontario, K1P 5L6 and all air traffic controllers working for hire or reward for NAV CANADA at the Calgary International Airport, Alberta, Canada from the requirement of paragraph 6.3.1(b) of Chapter 3 of Standard 821 ‑ Canadian Domestic Air Traffic Control Separation Standards, made pursuant to paragraphs 801.01(2)(a) and 801.08(b) of the Canadian Aviation Regulations (CARs), subject to the following conditions.
The relevant provisions of the CARs and Standard 821 are reproduced in Appendix A.
PURPOSE
The purpose of this exemption is to allow NAV CANADA air traffic controllers at the Calgary International Airport to authorize reduced angular divergence of air traffic control separation from 15 degrees or more to 10 degrees or more, as it pertains to simultaneous parallel instrument departure operations (SPID). The rationale for the reduction of angular divergence at Calgary International Airport is one of the elements of the overall noise abatement program at that Airport.
APPLICATION
This exemption applies to NAV CANADA and its air traffic controllers at the Calgary International Airport when issuing air traffic control clearances or instructions, as it pertains to SPID, and only to aircraft departing from runways 17L and 17R.
CONDITIONS
This exemption is subject to the following conditions:
- NAV CANADA air traffic controllers shall assign, to both departing aircraft, tracks or, as appropriate, headings to ensure that the tracks diverge by 10 degrees or more immediately after take-off;
- NAV CANADA air traffic controllers may assign a heading to one aircraft and a track to another aircraft, provided drift correction is applied to the aircraft on the heading to ensure the required divergence;
- NAV CANADA air traffic controllers shall only apply 10 degrees or more divergence to aircraft departing from runways 17L and 17R at Calgary International Airport;
- NAV CANADA air traffic controllers shall radar identify both departing aircraft within one mile of the end of the runway used for take-off; and
- NAV CANADA air traffic controllers shall not clear or permit an aircraft to turn toward the departure path of the other aircraft, unless another form of separation has been achieved.
VALIDITY
This exemption is in effect until the earliest of the following:
- August 31, 2019 at 23:59 (MDT);
- the date on which any condition set out in this exemption is breached; or
- the date on which this exemption is canceled in writing by the Minister where she is of the opinion that it is no longer in the public interest or it is likely to adversely affect aviation safety.
DATED at Ottawa, Ontario, this 27th of October, 2014, on behalf of the Minister of Transport.
“Original signed by”
Martin J. Eley
Director General
Civil Aviation
Relevant provisions of the CARs
General
801.01
- No person shall act as an air traffic controller or a flight service specialist
[…]
- No air traffic controller shall issue an air traffic control clearance or an air traffic control instruction except
- in the case of domestic airspace, in accordance with the Canadian Domestic Air Traffic Control Separation Standards; and
[…]
Provision of Air Traffic Services in Accordance with ATS Site Manual
801.08 No holder of an ATS operations certificate shall provide air traffic services at an operational location unless the services are provided in accordance with
[…]
- in the case of air traffic control services, the Canadian Domestic Air Traffic Control Separation Standards.
Relevant provisions of Standard 821 - Canadian Domestic Air Traffic Control Separation Standards
Chapter 3
6.0 Radar Departures
6.3.1 The following conditions shall be met when a departing aircraft is authorized to take-off from a runway that is parallel to a runway being used by another departing aircraft:
- the runways are 2,500 feet or more apart (centre line to centre line);
- both aircraft will follow assigned tracks that diverge by 15 degrees or more immediately after take-off;
- radar identification of both aircraft will be established within 1 mile of the runway used for take-off;
- a maximum of 60 miles is displayed on the radar display; and
- neither aircraft is cleared nor permitted to turn towards the departure path of the other unless another form of separation has been achieved.
- Date de modification :