Advisory Circular (AC)

Appendix 1

Chart 1 - DAR Structures

Authorized Areas

Structure

Landing Gear

Flight Control

Special

Delegated Functions

       
1. Static Analysis        
2. Dynamic Analysis        
3. Fatigue Analysis        
4. Damage Tolerance        
5. Detail Design        
6. Flutter Analysis        
7. Witness Official Tests        
8. Structural Limitations        
9. MRB Actions        
10. Service Documents        
11. Flotation & Ditching        
12. Loads        

 

 

Note: 1

 

 

  1. Established appointment areas may be indicated by "X".
  2. Design standards in which DAR is authorized are shown on the DAR appointment card.

Chart 2 - DAR - Powerplant

Authorized Areas

Turbine Engine Instal- lation

Piston Engine Instal- lation

Powerplant-General

Powerplant-Rotorcraft

Engine

Propeller

Special

Delegated Functions

             
1. Engine Installations              
2. Fuel and Oil System              
3. Induction System and Cowling              
4. Exhaust and Thrust Reverser              
5. Powerplant Fire Protection              
6. Powerplant Ice Protection              
7. Powerplant Cooling              
8. Performance              
9. Vibration Analysis              
10. Propeller Installation              

 

 

Note:

 

 

  1. Established appointment areas may be indicated by "X".
  2. Design standards in which DAR is authorized are shown on the DAR appointment card. 

Chart 2 - DAR - Powerplant (Cont'd)

Authorized Areas

Turbine Engine Instal- lation

Piston Engine Instal- lation

Powerplant-General

Powerplant-Rotorcraft

Engine

Propeller

Special

Delegated Functions

             
11. Approved Service Documents              
12. Lightning Protection              
13. Drive System Installation              
14. Manuals              
15. Reliability Analysis              
16. Drive System Analytical System              
17. Transmission              
18. Noise Testing              
19. Exhaust Emissions              
20. Detail Design              

 

 

 Note:

 

 

  1. Established appointment areas may be indicated by "X".
  2. Design standards in which DAR is authorized are shown on the DAR appointment card.

Chart 3A - DAR - Systems And Equipment (Mechanical)

Authori- zed Areas

Air Condi- tioning

Hydra- ulic

Ice Protec- tion

Rain Protec- tion

Oxy- gen

Pneu- matics

Wheel Tire Brakes

Interior Argmt.

Pres- suriza- tion

Fire Protec- tion

Delegated Functions

                   
Installation & Detail Design                    
Equip. Qualification Tests                    
Witness Official Tests (with prior Authorization)                    
Material Qualification                    
Approve Service Documents                    
Reliability Analysis                    

 

 

Note:

 

 

  1. Established appointment areas may be indicated by "X".
  2. Design standards in which DAR is authorized are shown on the DAR appointment card.

Chart 3B - DAR - Systems And Equipment (Electrical)

Authorized Areas

Electrical

Eelect- ronic

Flight Instru- ments

Pilot Static

Lightning Protection

Special

Digital Eng. Control

Soft- ware

Delegated Functions

               
Installation & Detail Design                
Equip. Qualification Tests                
Approve Service Documents                
Witness Official Tests (with prior Authorization)                
Reliability Analysis                

 

 

Note:

 

 

  1. Established appointment areas may be indicated by "X".
  2. Design standards in which DAR is authorized are shown on the DAR appointment card. 

Chart 3C- DAR - Systems And Equipment (Avionics)

Authorized Areas

Eelect- ronics

Communi- cation

Auto Flight Cont.

Navigation Systems

Flight Control

Special

Soft- ware

Acous- tics

Delegated Functions

               
Installation & Detail Design.                
Equip. Qualification Tests                
Approve Service Documents                
Witness Official Tests (with prior Authorization)                
Reliability Analysis                

 

 

Note:

 

 

  1. Established appointment areas may be indicated by "X".
  2. Design standards in which DAR is authorized are shown on the DAR appointment card.