- Back to the Containers home page
- Aerosol Containers and Gas Cartridges
- Cylinders, Spheres and Tubes
- UN cylinders, UN tubes, UN cryogenic receptacles, and multiple-element gas containers
- Tank Trucks and Trailers and TC Portable Tanks
- Containers for Infectious substances
- Railway Tank Cars and Ton Containers
- UN Small Means of Containment
- UN Portable Tanks
- Containers for Explosives (Class 1)
What type of packaging can be used to transport waste of Class 6.2
There are various types of standardized and non-standardized packagings permitted in Part III of the CAN/CGSB-43.125 standard for the transport of infectious substances of Category A and Category B intended for disposal and clinical, (bio) medical or regulated medical waste (i.e. waste of Class 6.2). These were formerly referred to as Type 1C packagings.
For example, a packaging for transporting waste of Class 6.2 may consist of:
- a UN11G fibreboard intermediate bulk container (IBC) with inner liner tested to a Packing Group I or II performance level;
- a UN1G fibre drum with a leakproof liner tested to a Packing Group I or II performance level;
- a plastic film bag in a rigid, leakproof, plastic outer packaging; or
- a plastic film bag in a fibreboard box.
Please consult Part III of CAN/CGSB-43.125 for details on these and all other standardized and non-standardized packagings permitted to transport waste of class 6.2.
Must I register packaging for waste of Class 6.2?
No. Packagings for waste of Class 6.2 do not need to be registered with Transport Canada. However, if components of the packagings are themselves UN standardized containers (eg. a UN IBC or a UN fibreboard box), these containers must be designed, constructed and manufactured in accordance with all applicable standards, including registration.
How do I identify a packaging for waste of Class 6.2?
There is no unique compliance marking specifically prescribed for a packaging for waste of Class 6.2. If a component of this type of packaging is a UN standardized means of containment (for example, a UN IBC or UN drum), that component will have a UN marking. A packaging for waste of Class 6.2 will not have a UN marking if it is comprised of non-standardized means of containment (for example, a plastic bag in a rigid, leakproof, outer packaging).
Where can I get a packaging for waste of Class 6.2?
Transport Canada does not have a list of vendors for packagings permitted in Part III of the CAN/CGSB-43.125 standard because many different types of standardized and non-standardized packagings are permitted.
Where can I obtain more information?
Please include the text "Packaging for infectious substances" in the subject line.