Qualification Test Guide
Approval Page
Company Name: _______________________________________________
FTD Type/Name: _______________________________________________
Type of Aircraft Represented: _____________________________ i.e. C172
The above mentioned Flight Training Device has met the requirements applicable to Flight Training Devices in accordance with section 606.03 - Synthetic Flight Training Equipment of the Canadian Aviation Regulations.
The operator is responsible for the validation of the Flight Training Device in order to maintain a valid status on the list of approved Flight Training Devices and allow the recognition of credits for the training completed on the device.
Date of Approval: _______________________________
| ____________________________ | ____________________________ |
| Company | Transport Canada |
FTD Identification
2.1.1 The Qualification Test Guide herein is applicable to FTD ID #____________, for qualification to Level ___ FTD in accordance with Transport Canada Aeroplane and Rotorcraft Simulator Manual, TP 9685 Revision 2.
2.1.2 FTD Model _______________________was manufactured by _______________________.
2.1.3 For the purpose of this test guide, APPR Flap is considered to be ______ degrees of flap.
2.1.4 For the purpose of this test guide, WEIGHT is considered to be _______ KG or ________ LB
2.1.5 Approval was based on using a _____________________________ computer type.
2.1.6 Equipment required to conduct the certification is a __________________________ spring scale and a digital stop watch.
2.1.7 Method of attachment _____________________________________
2.1.8 All validation tests are conducted under ISA conditions, therefore temperatures are not part of the initial conditions for each test.
2.1.9 Acceptable location, (the FTD shall be in a closed room suitable to conduct training)?
Yes _______ No _______
2.1.10 Pilot's seat arrangement - Fixed pilot's seat/s shall be adjustable fore and aft. The seat height shall be equivalent to aircraft seating, (distance from cushion to yoke).
Yes _______ No _______
2.1.11 Instructor console: The instructor console shall be positioned and designed to enable the instructor to readily introduce faults, configuration changes and to freeze the FTD without distracting the trainees.
Yes _______ No _______
2.1.12 Aircraft type Log book available?
Yes _______ No _______
(Note: Any other descriptions or items considered to be appropriate may be added on this page.)