When applying for, renewing, or amending your Means of Containment facility registration, you must submit a request to: MOCregister-Registrecontenant@tc.gc.ca
On this page
Registration requirements
In most instances, you may complete an application form and provide the supporting documentation. In other instances, you will need to send an email providing the required information described in the safety standard.
The following table outlines the registration requirements based on safety standard, container type, and function.
| Standard and Container Type | Function | Registration Requirements |
|---|---|---|
|
CSA B620 Highway tanks and TC portable tanks |
Manufacture, Assemble, Modify, Repair, Test and Inspect |
Please complete form and provide supporting documentation: Application form - Manufacture, Assemble, Modify, Repair, Test and Inspect |
| Design review agency |
Please refer to CSA B620, clause 8.3.3.3 and send an email: Application for designation shall be made to the Director and include
|
|
| Training organization |
Please complete form and provide supporting documentation: |
|
| Design engineer |
Please complete form and provide supporting documentation: |
|
|
CSA B339 Cylinders, spheres and tubes |
Manufacture |
Please consult requirements and send email: |
|
Please consult requirements and send email: Cylinder - Registration Requirements - Repair, Rebuild, Reheat Treat |
|
| Requalification - External visual inspection |
Please complete form and provide supporting documentation: Application form - Requalification - External visual inspection |
|
| Requalification - Pressure test and visual inspection |
Please complete form and provide supporting documentation: Application form - Requalification - Pressure test and visual inspection |
|
| Requalification – Cylinders for Acetylene Service |
Please complete form and provide supporting documentation: Application form - Requalification – Cylinders for Acetylene Service |
|
|
CSA B341 UN cylinders, UN tubes, UN cryogenic receptacles, and multiple-element gas containers (MEGCs) |
|
Please consult requirements and send email: UN Cylinder - Registration Requirements - Manufacture, Repair, Inspection Body |
| Periodic inspect and test body – Pressure test |
Please complete form and provide supporting documentation: Application form - Periodic inspect and test body – Pressure test |
|
| Periodic inspect and test body – Ultrasonic examination | Please refer to CSA B341, Annex B, B.2 “Registration process and requirements for periodic inspection and test bodies” and send an email and provide supporting documentation. | |
|
CGSB-43.123 Aerosol Containers and Gas Cartridges |
Manufacture |
Please consult requirements and send email: Aerosol Containers and Gas Cartridges - Registration Requirements - Manufacture |
|
CSA B625 UN Portable tanks |
Manufacture, Modify, Repair, Test and Inspect |
Please complete form and provide supporting documentation: Application form - Manufacture, Assemble, Modify, Repair, Test and Inspect |
| Independent inspector, Design review agency, Design review engineer |
Please complete form and provide supporting documentation: Application form - Independent inspector, Design review agency, Design review engineer |
|
| Impact Test Facility, Impact Test Witness |
Please complete form and provide supporting documentation: Application form - Impact Test Facility, Impact Test Witness |
|
|
TP 14877/CGSB-43.147 Railway Tank Cars |
Tank Car manufacture, assemble, fabricate, modify, repair or qualify / Service equipment manufacture, repair, Qualify, remove & replace / Linings and coatings install, repair, qualify |
Please complete form and provide supporting documentation: |
|
TP 14877/CGSB-43.149 Ton Containers |
Manufacture |
Please consult requirements and send email: |
| Test and Inspect |
Please consult requirements and send email: Ton Containers - Registration Requirements - Test and Inspect |
|
| Independent inspector |
Please consult requirements and send email: Ton Containers - Registration Requirements - Independent inspector |
|
|
TP 14850/CGSB-43.150/CGSB-43.126 UN Small means of containment (Small packaging - Drums, Jerricans, Boxes, bags, composite packaging, combination packaging) |
Manufacture UN small containers |
Please complete form and provide supporting documentation: |
| Recondition, remanufacture and repair UN drums |
Please complete form and provide supporting documentation: Application form - Recondition, Remanufacture and Repair UN drums |
|
|
CGSB-43.125 Packaging for Infectious substances |
Manufacture |
Please complete form and provide supporting documentation: |
|
CGSB-43.146 UN IBC (Intermediate bulk container) |
Manufacture |
Please complete form and provide supporting documentation: |
| Leak test and inspect |
Please complete form and provide supporting documentation: |
Contact us
Inquiries pertaining to applications for registration:
Email: MOCregister-Registrecontenant@tc.gc.ca
Telephone: 1-855-298-1520
After choosing the language (1 for English, 2 for French), press option 1.