Flexible fuel manifolds Pratt & Whitney Canada PW100 series engines - Service Difficulty Advisory

No. AV-2007-03
09 February 2007

The PW100 series flexible fuel manifold was introduced to replace the original, rigid fuel manifold configuration. Although both manifold configurations deliver atomized fuel to the combustion chamber in the same manner, the flex manifold does not use the transfer-tube design and is less labor intensive during removal and installation of the engine fuel nozzles.

Since introduction of the flexible manifold, there have been instances of manifold nuts being improperly torqued during installation, resulting in fuel leaks. More seriously, an engine fire resulted in two of the above events. Although the primary and secondary sealing features at each nozzle provide effective sealing, it is essential that the fuel manifold nut be properly torqued to maintain the integrity of the seal.

In order to prevent further fuel leaks and engine fires, Transport Canada Civil Aviation (TCCA) recommend that maintainers, operators and overhaul agencies comply with the aforementioned SIL PW100-098R1 at the earliest opportunity.

Malfunctions, defects or failures occurring on aeronautical products should be reported to Transport Canada, Continuing Airworthiness, Ottawa, Ontario, via the Service Difficulty Reporting program.

For further information, please contact a Transport Canada Centre, or contact Mr. Barry Caldwel at 613-952-4358, facsimile 613-996-9178 or e-mail caldweb@tc.gc.ca

For Director, Aircraft Certification

Robin Lau
Acting Chief, Continuing Airworthiness
Chef intérimaire, Maintien de la navigabilité aérienne

Note: For the electronic version of this document, please consult the following Web address: https://tc.canada.ca/en/aviation/aircraft-airworthiness/aircraft-certification