Transport Publication 13430 E
Figure 1.1 - Length (section 1.1)
Figure 2.1 - Breadth (subsection 2.2.2)
Figure 2.2 - Camber (subsection 2.2.3)
Figure 2.3 - Enclosed & Excluded Spaces (subsection 1.2.2.1(a)(i))
Figure 2.4 – Enclosed & Excluded Spaces (subsection 1.2.2.1 (a)(ii))
Figure 2.5 – Enclosed & Excluded Spaces (subsection 1.2.2.1 (a)(ii))
Figure 2.6 - Enclosed & Excluded Spaces (subsection 1.2.2.1(a)(ii))
Figure 2.7 – Enclosed & Excluded Spaces (subsection 1.2.2.1(a)(iii))
Figure 2.8 - Enclosed & Excluded Spaces (subsection 1.2.2.1(a)(iii))
Figure 2. 9 - Enclosed & Excluded Spaces (subsection 1.2.2.1(b))
Figure 2.10 - Enclosed & Excluded Spaces (subsection 1.2.2.1(c))
Figure 2.11 - Enclosed & Excluded Spaces (subsection 1.2.2.1(e))
Figure 2.12 - Breadth of Deck in Way of Opening (for vessels with rounded gunwales) (subsection 1.2.2.4)
Figure 2.13 - Enclosed & Excluded Spaces (subsection 1.2.2.1(d))
Figure 2.14 - Enclosed & Excluded Spaces (subsection 1.2.2.3)
Figure 2.15 - Moulded Depth (subsection 2.2.9(a) to (d))
Figure 2.16 - Upper Deck (subsection 2.2.10(a) and (b))
Figure 2.17 - Stepped Upper Deck (subsection 2.2.5(e) and 2.2.10(b))
Figure 2.18 - Stepped Upper Deck (subsection 2.2.10.1)
Figure 2.19 - Recessed Upper Deck (subsection 2.2.10.3)
Figure 2.20 - Upper Deck (subsection 2.2.10.4)
Figure 2.21a – Tonnage Length (subsection 2.2.9)
Figure 2.21b –Tonnage Length (subsection 2.2.9)
Figure 2.22 – Split Hull Barges and Dredges (subsection 2.7.5)
Figure 2.23 – Division of Tonnage Length (subsection 2.8.2.3)
Figure 2.24 - Parabolic Curved Camber (subsection 2.8.4.1(a))
Figure 2.25 – Straight Line Camber (subsection 2.8.4.1(b))
Figure 2.26 – Straight Line Camber (subsection 2.8.4.1(c))
Figure 2.27 – Depth of Transverse Section(subsections 2.8.5.1(a)(i), and 2.8.5.1(b)(i) to (iii))
Figure 2.28 – Depth of Transverse Section (subsection 2.8.5.1(b)(iv))
Figure 2.29 – Depth of Transverse Section (subsection 2.8.5.1(a)(ii))
Figure 2.30 – Depth of Transverse Section (subsection 2.8.5.1.(a)(iii))
Figure 2.31 – Division of Depth of Transverse Section(subsections 2.8.6.2 and 2.8.7.1)
Figure 2.32 – Calculation of Volume with Stepped Upper Deck (subsection 2.8.9.2)
Figure 2.33 – Overhang Beyond the Upper Deck (subsection 2.8.10.2)
Figure 2.34 – Overhang Deck (subsection 2.8.10.3(b))
Figure 2.35 – Bulbous and Similar Bows (subsections 2.8.9.3 and 2.8.10.4)
Figure 2.36 – Skegs and Keels (subsection 2.8.10.5)
Figure 2.37 – Shaft Bossing (subsection 2.8.10.6)
Figure 2.38 – Termination of Measurements (subsection 2.9.2.2)
Figure 2.39 – Breaks Forward and Foc’sles (subsection 2.9.4.1(c))
Figure 2.40 – Breaks Aft and Poops (subsection 2.9.4.1(d))
Figure 3.1 (a) – Tonnage Measurement Dimensions TML , TMB , TMD for a vessel that does not meet the requirements for Upper deck (subsections 3.2.6; 3.2.7.1; 3.2.7.3 and 3.2.8)
Figure 3.1 (b) – Tonnage Measurement Dimensions TML , TMB , TMD for a vessel that meets the requirements for Upper deck (subsections 3.2.6; 3.2.7.1 and 3.2.8)
Figure 3.2 – TMB Measurement with Tumblehome (subsection 3.2.6)
Figure 3.3 – Tonnage Measurement Depth ( TMD ) (subsection 3.2.7)
Figure 3.4 – Tonnage Measurement Depth ( TMD ) (subsection 3.2.7)
Figure 3.5 – Measurement of the total combined length of a single tier of deckhouse/superstructure and a break (sections 3.4.2 and 3.5.3.2)
Figure 3.6 – Measurement of Spaces above the Upper Deck (subsection 3.5.3.1)
