Table of Contents
- Overview of the program, operating context and environment
- Considerations and drivers for oversight activities priorities
- Oversight delivery in 2023-24
- Organizational contact information
- Annex A: Definitions
1. Overview of the program, operating context and environment
The Transportation of Dangerous Goods Program’s goal is to improve the safety of transporting dangerous goods in Canada. This is required by Canadian law. The program:
- develops safety regulations and standards
- oversees the transportation of dangerous goods
- provides expert advice, like through the Canadian Transport Emergency Centre (CANUTEC)
- identifies threats to public safety
- enforces the Transportation of Dangerous Goods Act and its regulations
- gives advice to emergency responders
- reduces the impact of incidents that involve dangerous goods
- does strategic risk assessments and scientific research
The National Oversight Plan describes all the program’s oversight activities. These include:
- regulatory authorizations
- inspections
- quality control activities
- enforcement actions and investigations
- education, outreach and awareness activities
Operating context
As of March 2023, the program has 153 positions that directly oversee the transportation of dangerous goods. This includes 118 inspector positions. This year, 83 inspectors will conduct inspections.
We use a risk-based schedule to inspect dangerous goods sites and means of containment facilities. As a result, every known site and facility is inspected within a set timeframe, with the higher risk ones given top priority.
We’re always improving our risk management processes. This includes updating our risk register to stay ahead of potential issues and make sure our inspection program can target the sites and facilities with the greatest risk to public safety.
Industry overview
Number of dangerous goods sites and means of containment facilities
We know of 15,911 commercial sites in Canada that handle, offer for transport, transport, or import dangerous goods. There are 1,823 registered means of containment facilities in Canada and abroad. There are also many dangerous goods sites that we still don’t know about.
The totals above don’t include the dangerous goods sites or means of containment facilities inspected by the Government of Alberta on behalf of the federal government. In Alberta, provincial inspectors check dangerous goods sites that transport goods on the road or provincially-regulated railway. They also inspect highway tank facilities.
Risk levels
The program classifies all known dangerous goods sites and means of containment facilities based on how likely, and how severe, a release of dangerous goods would be from the facility.
For 2022 to 2023, the percentage of dangerous goods sites assigned to each risk level were:
- high: 1%
- moderate: 7%
- low: 13%
- very low: 79%
For 2022 to 2023, the percentage of means of containment facilities assigned to each risk level were:
- high: 5%
- moderate: 37%
- low: 49%
- very low: 5%
- new or unranked: 4%
Inspection cycles
Dangerous goods sites and means of containment facilities with higher risk scores are given shorter inspection cycles, and so, they are inspected more often. The program prioritizes dangerous goods sites and means of containment facilities based on their inspection cycle and how long it has been since their last inspection.
For 2023 to 2024, 92% of dangerous goods sites were within their inspection cycle. 83% of means of containment facilities were within their inspection cycle.
Compliance rates
The overall non-compliance rate for 2021-2022 was 40%. This represents a 2% drop from 2020-2021, and a 15% drop from 2017-2018.
Safety trends
The number of dangerous goods incidents decreased compared to 2019. COVID-19 lockdowns and a slower economy meant fewer incidents in 2020 and 2021. Most incidents happen on the road.
2. Considerations and drivers for oversight activities priorities
The Transportation of Dangerous Goods Program’s oversight priorities for 2023-2024 include:
- improving the database of dangerous goods sites and means of containment facilities
- developing a national compliance rate by monitoring compliance rates at the federal, provincial and territorial level
These priorities are reinforced by government and ministerial directions, as well as recommendations from auditors.
- In Budget 2016 and 2019, Transport Canada was given authority to develop and put in place a Client Identification Database to register and keep track of stakeholders
- Core responsibility 1 in Transport Canada’s Departmental Plan 2023-2024 is to build a safer and secure transportation system that Canadians trust
- There were 4 oversight-related recommendations made in the fall 2020 follow-up audit on the transportation of dangerous goods. Transport Canada agreed with all these recommendations
The following section contains program-specific considerations that guide oversight planning for 2023-2024.
Inspection campaigns
The program is planning to conduct 2 inspection campaigns through unplanned inspections that focus on:
- shipments of non-original equipment manufacturer (OEM) lithium batteries
- bulk storage facilities
Unplanned activities
Any notable increase in unplanned activities or incidents will make it harder for the program to complete its planned activities.
Keeping up with more means of containment facility inspections
Due to an increase in the number of non-compliances at means of containment facilities in recent years, the program increased the number of inspections at means of containment facilities in 2020-2021. This was done by increasing the proportion of inspections of this type to 10%.
The program maintained this level for 2021-2022 and 2022-2023 and will do so again this year.
Results of compliance strategy on means of containment facilities
The program developed a compliance strategy for means of containment facilities in 2019 due to an increase in the number of non-compliances. After reviewing the inspection results from 2019 to 2022, the program found no industry-wide issues.
The review found that the program improved guidance documents and headquarters worked more closely with the regions. The program also improved the process for managing expired registration certificates.
Minimum number of inspections
The program set a minimum number of inspections that would be planned for 2023-2024.
3. Oversight delivery in 2023-24
The delivery of oversight activities, such as planned risk-based inspections and reactive inspections, will be reported through the Canadian Center on Transportation Data (CCTD).
4. Organizational contact information
Transport Canada welcomes your comments on this report.
Email: tdg-tmd@tc.gc.ca
Annex A: Definitions
|
Required Field |
Description |
|
Oversight |
How Transport Canada promotes, monitors or enforces compliance with our safety and security requirements. |
|
Regulatory authorizations |
Given when a regulated party (for example, a railway company or vehicle manufacturer) applies for permission to do a regulated activity, or be exempt from it. We may give permission in various forms, including a permit, licence or certification. Transport Canada does not control the number of regulatory authorizations per planning cycle. |
|
Inspection |
A documented, formal examination of industry compliance with Canadian transportation safety and security rules, regulations and requirements. Authorized Transport Canada officials record the results of each inspection. For the purposes of this document, audits are a type of inspection. *Includes pre-site, onsite, and post-site inspection and oversight activities. Is complete when the inspector submits an approved inspection or oversight activities report. Does not include follow-up action, quality control checks or outreach activities. |
|
Planned, risk-based inspections |
All inspections Transport Canada initially commits to doing in a given planning cycle. The SO3 Management Board may authorize updates as needed. *Include inspections that are announced (and expected), and those that are unannounced. Does not include:
|
|
Follow-up activities |
Arise from findings of an initial inspection. May include an on-site inspection, requests for more information, or enhanced monitoring. *Do not include enforcement. |
|
Other activities |
Oversight activities that Transport Canada did not initially commit to in a planning cycle, and are not a follow-up to an inspection or audit. |
|
Enforcement |
Measures we use to enforce requirements and compel compliance. For example:
|
|
Education, outreach and awareness |
How we educate the public, and encourage people and companies to comply with the law (for example: industry conferences, air shows, training, web portal) |
|
Quality control |
How we ensure inspectors follow policies and procedures, and complete required documentation. Applies to an entire oversight activity, from inspection, to follow-up, to resolving non-compliance. Supervisors and managers are responsible for quality control. Each program must have:
|